Land Rover Series II and IIA (2 & 2A) Workshop Manual

Factory Reprint, AKM8159

Land Rover Series II & IIA Workshop Manual - covers Land Rover Series 1, 2A, engines: 2.25 & 2.6 litre Petrol and 2.25 litre Diesel

This Repair Operation Manual covers all overhaul and repair procedures for the 'basic' Land-Rover; briefly described below, but does not include the use and overhaul of 'Optional extra equipment', which is the subject of a separate publication.
The 'basic' Land-Rover is produced in two wheel base lengths, 88 inch and 109 inch (2,23 m and 2,76 m), with a choice of three engine types; 2¼ litre—four cylinder Petrol and Diesel and 2.6 litre—six cylinder Petrol. Other equipment, including fuel system, electrical equipment, drive units brakes and bbdy vary according to model and choice.
Identification of a particular model can be made by referring to the vehicle number and the chart on the following page. The Vehicle number is stamped on a plate mounted inside the driving compartment.
Although this Manual applies specifically to Bonneted Control models, most of the overhaul procedures also apply to Forward Control models when the units are removed from the vehicle.